NAGWare Fortran Tools - f95 Tools - nag_ustan95
Index
- NAME
-
- DESCRIPTION
-
- OPTIONS
-
- SEE ALSO
-
NAME
nag_ustan95 - USE statement annotator
DESCRIPTION
This tool changes USE statements, wherever possible, to the form:
USE module name, ONLY: entity-list
where entity-list is a list of the module entities used in the current
scope including any renames specified on the original USE statement.
USE statements in a module will only be changed if the default access
of the module is PRIVATE. This is because it is not known which of the
entities from the USEd module will be referenced by programs that USE
the module.
Unnecessary USE statements are also deleted. If a module is accessible
through more than one chain of USE statements, redundant USE
statements are removed.
If a filename with no extension is provided the tool will look for a file
with the extension `.f95', and if that does not exist, for a file with
the extension `.f90'.
If a file has the extension `.f90' or `.f95', it will be assumed to
contain free format Fortran code. If a file has the extension
`.f', `.for', `.f77', or `.ftn', the file is assumed to contain fixed format
Fortran code. The options -fixed and -free may be used
to override this behaviour.
The input file is backed up to infile.original and the
output file replaces the input file.
Modules (and include files) are expected to exist in the current
working directory or in a directory named by the -I option, see
nag_modules95.
OPTIONS
General Options
- "Source format" (-fixed, -free)
-
Forces the tool to assume fixed or free format for the
input file. If "Automatic" is set, .f90 files will be
assumed to contain free format code , .f, .for, .f77,
or .ftn are assumed to contain fixed format code.
- "Include and module directories" (-I)
-
Add pathname to the list of directories which are to be searched for
include files. The current working directory is always searched
first, then any directories named in -I options.
- "Fixed format source line length" (-132)
-
Increase the length of each fixed source form input line from 72
characters to 132 characters. This has no effect on free source form
input.
- "Allow double complex specific intrinsics" (-dcfuns)
-
Enable recognition of non-standard double precision complex intrinsic
functions. These act as specific versions of the standard generic intrinsics
as follows:
Non-standard Equivalent Fortran 95 Intrinsic
CDABS(A) ABS(A)
DCMPLX(X,Y) CMPLX(X,Y,KIND=KIND(0d0))
DCONJG(Z) CONJG(Z)
DIMAG(Z) AIMAG(Z)
DREAL(Z) REAL(Z) or DBLE(Z)
- "Downgrade legacy code errors to warning" (-dusty)
-
Allows the analysis of ``legacy'' software by
downgrading the category of common errors found in such software from
``Error'' to ``Warning'' (which may then be suppressed entirely with the
-w option).
- "Suppress information messages" (-info)
-
Suppress output of tool analysis stages information messages.
- "Kind numbers"
-
- "Byte kinds" (-kind=byte)
-
Alter the kind numbering system used so that the kind numbers for
INTEGER, REAL and LOGICAL match the number of bytes of storage
(e.g. default REAL is 4 and DOUBLE PRECISION is 8). Note that COMPLEX
kind numbers are the same as its REAL components, and thus half of the
total byte length in the entity.
- "Sequential kinds" (-kind=sequential)
-
This confirms the default kind numbering system where all datatypes
are numbered sequentially from 1 and increase with precision.
This option does not affect the interpretation of byte-length
specifiers (an extension to Fortran 77).
- "Downgrade argument checks between routines in different files" (-mismatch)
-
Downgrade consistency checking of procedure argument lists so that mismatches
produce warning messages instead of error messages.
This only affects calls to a routine which is not in the current file; calls
to a routine in the file being compiled must still be correct.
- "Downgrade argument checks between routines in the same file" (-mismatch_all)
-
Further downgrade consistency checking of procedure argument lists so that
calls to routines in the same file which are incorrect will produce warnings
instead of error messages.
- "Continuation line limit" (-maxcontin)
-
Increase the limit on the number of continuation lines to N. The
default, as specified by the Fortran standard, is 19 for fixed source
form and 39 for free source form. This will not decrease the limit
below the standard number.
- "Output strict Fortran 95 obsolescent messages" (-strict95)
-
Produce obsolescence warning messages for use of ``CHARACTER*'' syntax.
This message is not produced by default since most programs contain this
syntax.
- "Suppress warning messages" (-w=all)
-
Switch on or off tool analysis stages warning messages.
- "Suppress obsolescent feature warning messages" (-w=obs)
-
Switch on or off warning messages about the use of obsolescent features.
- "Suppress unused entity warning messages" (-w=unused)
-
Suppresses warning messages about unused entities.
It is equivalent to
-w=uda -w=uei -w=ulv -w=usy.
- "Suppress unused dummy argument warning messages" (-w=uda)
-
Switch on or off warning messages about unused dummy arguments.
- "Suppress unused explicit import warning messages" (-w=uei)
-
Switch on or off warning messages about unused explicit imports.
- "Suppress unused local variable warning messages" (-w=ulv)
-
Switch on or off warning messages about unused local variables.
- "Suppress unused symbol warning messages" (-w=usy)
-
Switch on or off warning messages about unused symbols.
- "Suppress Fortran 77 extension warning messages" (-w=x77)
-
Switch on or off extension warnings for common extensions to FORTRAN 77.
These are TAB format, byte-length specifiers and Hollerith constants.
- "Suppress Fortran 95 extension warning messages" (-w=x95)
-
Switch on or off extension warnings for extensions to Fortran 95.
SEE ALSO
nag_polopt95,
nag_modules95.
Copyright, Numerical Algorithms Group, Oxford, 1997-2001